Once the charger has been securely installed and before plugging the charger into an outlet, remove the fuse from the positive (+) lead from each bank on the charger.
After the fuse from the positive (+) lead from each bank on the charger has been removed, plug the charger into an outlet.
To program your charger, press the MODE button for each battery bank to select the proper charge output profile to match the chemistry and/or voltage of the battery to be charged. VERIFY all output profiles match the battery before use.
Once you have each bank of the charger programmed to the proper charge output profile to match the chemistry and/or voltage of EACH battery, connect the battery charger terminals from each battery bank to the appropriate battery to be charged based on chemistry and/or voltage. Once all connections have been made, reinstall the fuse(s) removed from the positive (+) lead from each bank on the charger.
NOTE: Your Norsk Lithium EVO-TEC charger will recall the charge output profile setting(s) selected during programming if the charger is disconnected from the wall outlet power the next time the charger is plugged into an outlet.