The Norsk Lithium Evo-Tec™ 24V 10A – 1 Bank On-Board Charger is designed to keep your 24V lithium battery system charged, reliable, and ready. Delivering a steady 10A output, this compact single-bank charger offers efficient onboard charging for anglers and boaters who demand dependable power.
Warranty:2 Years
Out of stock
Join the waitlist to be emailed when this product becomes available
EVO-TEC™ 24V 10A – 1 BANK ON-BOARD CHARGER – NORSK LITHIUM
The Norsk Lithium Evo-Tec™ 24V 10A – 1 Bank On-Board Charger represents the next evolution in lithium charging technology. Designed for users running a dedicated 24V battery system, this compact onboard charger delivers dependable performance, efficient charging, and the durability needed for demanding marine environments.
Built specifically for 24V lithium power systems, the Evo-Tec™ 1 Bank Charger provides a steady 10 amps of charging power to keep your battery charged and ready for the next trip. Whether you are preparing for a day on the water, powering marine electronics, or maintaining your trolling motor battery system, this charger is engineered to deliver consistent, reliable charging when you need it most.
The single-bank design makes it a clean and practical solution for boats with one 24V lithium battery setup. It helps simplify your charging routine by allowing you to plug in, charge efficiently, and get back to focusing on your next adventure. With onboard installation, your charger stays right where you need it, reducing clutter and making battery maintenance easier.
Engineered with performance, reliability, and convenience in mind, the Norsk Lithium Evo-Tec™ 24V 10A – 1 Bank On-Board Charger gives users a dependable charging solution built around modern lithium power. It is part of Norsk Lithium’s continued innovation in marine charging, offering anglers and boaters the flexibility to choose the perfect charger for their battery system.
ON-BOARD MOUNTING
EVO-TEC™ chargers are built for permanent on-board installation, giving you dependable charging access whenever your boat, fish house, or battery system is ready to plug in.
LITHIUM WAKE MODE
Easily wake a connected lithium battery from sleep mode by holding the charger’s mode button for 3–5 seconds. This helps reactivate the battery so charging can begin without needing to disconnect or jump-start the battery.
AUTOMATIC SHUTDOWN WHEN FULLY CHARGED
The Automatic Shutdown When Fully Charged feature of the Norsk Lithium® Evo-Tec™ On-Board Charger ensures optimal battery care and safety. Once the battery reaches full charge, the charger automatically stops the charging process to prevent overcharging and extend battery life.
REVERSE CONNECTION PROTECTION
The Reverse Connection Protection feature in the Norsk Lithium On-Board Charger provides critical defense against improper battery connections. This intelligent safety system detects if the battery cables are connected to the wrong terminals and immediately prevents charging to avoid damage.
OVER TEMPERATURE PROTECTION
When the temperature of the radiator inside the charger is more than or equal to 80℃ ±5℃ (176°F ±9°F), the charger will automatically reduce the output current for over temperature protection. When the internal temperature drops, the charging current will gradually increase and finally recover to max output. A waterproof cooling fan is installed outside the charger. When the bottom aluminum stretched plate’s temperature is higher than or equal to 50℃ ±5℃ (122°F ±9°F), the fan will work. When the bottom aluminum stretched plate’s temperature is lower than or equal to 40℃ ±5℃ (104°F ±9°F), the fan stops working.
BURNOUT PROTECTION
The Burnout Protection feature of the Norsk Lithium® On-Board Charger provides an essential safeguard against overheating and overloading. This advanced protection system monitors the charger’s internal temperature and power flow, automatically shutting down the charger if it detects conditions that could lead to burnout or damage.
IP67 WATERPROOF
The IP67 Waterproof rating of the Norsk Lithium® Evo-Tec™ On-Board Charger provides exceptional protection against environmental elements, making it highly suitable for harsh marine conditions. This rating ensures that the charger is completely dust-tight and can withstand submersion in water up to 1 meter deep for up to 30 minutes.
FULLY POTTED CASE W/ EPOXY RESIN
The Fully Potted Case W/ Epoxy Resin used in the Norsk Lithium® Evo-Tec™ On-Board Charger offers superior protection and durability by encapsulating the internal components in high-quality epoxy resin. This robust construction provides excellent resistance to moisture, dust, and vibrations, ensuring the charger remains operational even in harsh and challenging environments.
It’s a solid charger coming in close to 9 pounds. But because of the weight it makes it difficult to mount in a confined space. In addition, the mounting flange could be deeper to allow for more airflow for the fan. I used 1” spacers to allow for more air flow. Had it not been for that I would have given it 5 stars.
Thank you very much for the feedback on your 24V Evo-Tec charger. We will have the design team take your suggestions into consideration. If we are able to reduce weight without compromising durability or have a heat dissipation issue with the fan spacing we will implement those changes on a future generation of charger design.
EVO-TEC™ chargers are built for permanent on-board installation, giving you dependable charging access whenever your boat, fish house, or battery system is ready to plug in.
LITHIUM WAKE MODE
Easily wake a connected lithium battery from sleep mode by holding the charger’s mode button for 3–5 seconds. This helps reactivate the battery so charging can begin without needing to disconnect or jump-start the battery.
AUTO SHUTDOWN
EVO-TEC chargers automatically stop charging once the battery is fully charged, ensuring safety, preventing overcharging, and extending battery life.
REVERSE PROTECTION
EVO-TEC chargers safeguard against improper connections by detecting reversed cables and preventing charging to avoid damage.
OVER TEMP PROTECTION
The charger automatically adjusts to prevent overheating. If it gets too hot, it reduces power until it cools down, then gradually returns to full output. A waterproof cooling fan also kicks in when needed to keep everything running safely.
BURNOUT PROTECTION
Provides an essential safeguard against overheating and overloading. This advanced protection system monitors the charger’s internal temperature and power flow, automatically shutting down the charger if it detects conditions that could lead to burnout or damage.
IP67 WATERPROOF
EVO-TEC chargers are rated IP67 providing superior protection against water, dust, vibration, and harsh marine conditions for long-lasting durability.
FULLY POTTED
Evo-Tec™ On-Board Chargers offer superior protection and durability by encapsulating the internal components in high-quality epoxy resin. This provides excellent resistance to moisture, dust, and vibrations, ensuring the charger remains operational even in harsh and challenging environments.
Arpad K Takacs –
It’s a solid charger coming in close to 9 pounds. But because of the weight it makes it difficult to mount in a confined space. In addition, the mounting flange could be deeper to allow for more airflow for the fan. I used 1” spacers to allow for more air flow. Had it not been for that I would have given it 5 stars.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Norsk Lithium –
Thank you very much for the feedback on your 24V Evo-Tec charger. We will have the design team take your suggestions into consideration. If we are able to reduce weight without compromising durability or have a heat dissipation issue with the fan spacing we will implement those changes on a future generation of charger design.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal